没有其它华为数通智选交换机配置教程,只有以下答案。
1、配置文件相关命令
[Quidway]display current-configuration显示当前生效的配置
[Quidway]display saved-configuration显示flash中配置文件,即下次上电启动时所用的配置文件
resetsaved-configuration檫除旧的配置文件
reboot交换机重启
display显示系统版本信息
2、基本配置
[Quidway]super password修改特权用户密码
[Quidway]sysname交换机命名
[Quidway]interface ethernet 0/1进入接口视图
[Quidway]interface vlan进入接口视图
[Quidway-Vlan-interfacex]ip 配置VLAN的IP地址
[Quidway]ip route-static 静态路由=网关
[Quidway]monitor-port 指定镜像端口[Quidway-Ethernet0/2]quit退出系统视图
3、telnet配置
[Quidway]-interface vty 0 4进入虚拟终端
[S3026-ui-vty0-4]authentication-modepassword设置口令模式
[S3026-ui-vty0-4]set authentication-modepassword simple 222设置口令
[S3026-ui-vty0-4] privilege level 3用户级别
4、端口配置
[Quidway-Ethernet0/1]duplex{half|full|auto}配置端口工作状态
[Quidway-Ethernet0/1]speed{10|100|auto}配置端口工作速率
[Quidway-Ethernet0/1]flow-control配置端口流控
[Quidway-Ethernet0/1]mdi{across|auto|normal}配置端口平接扭接